Features

• The profile is designed with interference on the OD which provides a good static fit in the groove, preventing the entry of humidity and other contamination via the outside diameter.
• Sharp wiping lip to ensure any dirt is wiped off properly.
• For housings to ISO 6195-Type A.
• Pressure from the trailing side has to be avoided.

Application

Reciprocation rods in hydraulic cylinders, plungers. Max. pressure 0 bar, max. speed 2 m/s.

Installation

Snap-in installation.

When the cylinder cannot be dismantled, the wiper can also be installed in cut version. In this case the diameter should be increased by 2-3%.