Guide Rings

Guiding elements are designed to prevent metal to metal contact between components of hydraulic systems e.g. piston and cylinder barrel or shaft and cylinder head.

Features

  • Normally cut at an angle for easy installation, but also available as non-split version.

  • Low dynamic friction.

  • Low break-away forces after long standstills.

F01

F03

F04

Close Menu

F0-1

Price Quote without Insert Confirmed
Measurement Input
mm's
inches
mm's
inches
inches
Material *
$
$

Features

  • Normally cut at an angle for easy installation, but also available as non-split version
  • Low dynamic friction.
  • Low break-away forces after long standstills.

Application

Reciprocating pistons and rods in hydraulic cylinders, plungers. Max. speed 4 m/s, radial loads max. 70 N/mm2.

Installation

Snap-in installation.

Price Quote without Insert Confirmed
Measurement Input
mm's
inches
mm's
inches
inches
Material *
$
$

Features

  • Normally cut at an angle for easy installation, but also available as non-split version
  • For use in piston applications.
  • Design combines guiding and backring function.
  • Low dynamic friction.
  • Low break-away forces after long standstills.

Application

Reciprocating pistons and rods in hydraulic cylinders, plungers. Max. speed 4 m/s, radial loads max. 70 N/mm2.

Installation

Snap-in installation.

F0-4

Price Quote without Insert Confirmed
Measurement Input
mm's
inches
mm's
inches
inches
Material *
$
$

Features

  • Normally cut at an angle for easy installation, but also available as non-split versi
  • For use in rod applications.
  • Design combines guiding and backring function.
  • Low dynamic friction.
  • Low break-away forces after long standstills.

Application

Reciprocating rods in hydraulic cylinders, plungers, etc. Max. speed 4 m/s, radial loads max. 70 N/mm2.

Installation

Snap-in installation.

S1012-M

Price Quote without Insert Confirmed
Measurement Input
mm's
inches
mm's
inches
inches
Material *
$
$

Features

  • Symmetrical, single acting piston/rod seal, combined with pressure ring and support ring.
  • By adjusting the number of packings friction and leakage characteristics can be influenced.
  • Excellent static and dynamic sealing performance.
  • Excellent performance in high pressure conditions.
  • Useable for short and long stroke lengths.
  • High wear resistance.

Application

Reciprocating pistons/rods in hydraulic cylinders, plungers etc.

Used in heavy duty applications (presses) with return stroke by equipment weight. Max. pressure 500 bar, max. speed 0.5 m/s.

Installation

Installation normally in open housings.

At closed housings the parts need to be split. In this case the seal must be done  slightly larger (approx. 1% in diameter)