Features

• The profile is designed with one sharp lip for wiping off any dirt on the rod
• The residual oil film is recovered
• The wiper consists of a PTFE wiping part and an O-Ring as preload element, maintaining contact pressure on the rod
• Due to the use of an O-Ring the wiper is able to compensate deflections of the r
• Good dry running properties.
• No “stick-slip”.
• Pressure on the trailing side should be avoided.
• For housings to ISO 6195 Type D.

Application

Reciprocation rods in hydraulic cylinders, swiveling and coiling rods, plungers.

Installation

Snap-in installation for wipers bigger 25mm otherwise a partite groove is recommended. A large insertion chamber needs to be provided (angle 20-30°).